New to the forums or the TauLabs project? Let us know about yourself or what you are working on in here.

Hello

Moderator: CheBuzz

no avatar
User

Hotte

Posts

6

Joined

Mon May 23, 2016 9:20 am

Location

Germany, Karlsruhe

Hello

by Hotte » Mon May 23, 2016 10:02 am

Hi there,

i am building my first quad. So i am completly new at that.
My frame is a selfprinted clone of the crossfire 2 could be found on thingiverse and i am using the instructions from that project.

But i changed a view components that are used in this project. So i am not going to use a AMP 2.6 for it. I decieded to use a Sparky 2.0 with tau labs. Also i use other motors, sunnysky X3108S KV900 with APC 10x4,7 SlowFlyer.
My LiPo is 4s 7000 25/40c instead of the 5000 wich is smaller so i was used to improve my stands with additional Bumber (found on thingiverse) made of Flexfilament wich hopefully also helps me to get smother landings.
My remote is a turnigy 9xr Pro with a frsky XJT modul and a frsky x8r receiver and frsky Telemetry extend cable.
I use RCTimer 30A OPTO Brushless ESC and a uBEC 5v 3A to power up the sparky2.
I try to use SBus for Telemtry using the inverter cable based on a IC.
For SAT-Navigation i use a NEO-M8N with mag

Actual status:
Most Parts allready arrived. Still waiting for the uBec and NEO-M8N
- Frame is printed and mounted
- Motors, ESC, Powerdistribution are mounted and wired
- GSC is installed on OSX
- Sparky 2.0 is updated and working with the GSC

So i am happy to be part of the community right now :-)

Greatings from Germany,

Hotte
no avatar
User

wilhelmsen

Posts

15

Joined

Fri Oct 09, 2015 6:31 pm

Re: Hello

by wilhelmsen » Tue May 31, 2016 6:21 pm

Good luck man :)

Sent from my Nexus 5X using Tapatalk
User avatar
User

Holzleim

Posts

28

Joined

Wed Jul 15, 2015 5:41 am

Location

Germany, near Bonn

Re: Hello

by Holzleim » Fri Jun 03, 2016 8:47 am

Hi there,

glad to hear some more guys are using taulabs....

BR,
Thomas

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign
cron