Talk about sensors, OSD systems, radios and anything else related to electronic hardware.
no avatar
User

brat002

Posts

95

Joined

Mon Mar 02, 2015 9:12 pm

Re: Ublox neo M8N with quanton

by brat002 » Thu Apr 02, 2015 8:34 pm

I prepared full settings erase, flashed last stable release. Then configured ports and added PositionHold to flight modes. Then enabled GPS, VtolPathFollower and Altitude hold modules but nothing changed. SystemConfig button is crossed.
no avatar
User

pug398

Posts

700

Joined

Fri Mar 07, 2014 2:26 am

Re: Ublox neo M8N with quanton

by pug398 » Thu Apr 02, 2015 11:07 pm

When you roll cursor over X'd out System Config and left mouse click on it what does it say in the pop up box?

If you should get nothing to pop up when clicked then it sounds like it is probably that the Navigation Filter is not set to INS since that is one configuration error that it will not tell you directly in a pop up.

Settings>State Estimation>AttitudeFilter = INSOutdoors
NavigationFilter = INS

flying line of sight I prefer AttitudeFilter = Complementary
no avatar
User

pug398

Posts

700

Joined

Fri Mar 07, 2014 2:26 am

Re: Ublox neo M8N with quanton

by pug398 » Thu Apr 02, 2015 11:47 pm

Any chance someone wants to compare this manual setup file to autoconfig?

*File was removed because it did not load back to the gps rx correctly.
Last edited by pug398 on Sat Apr 04, 2015 2:21 am, edited 1 time in total.
no avatar
User

brat002

Posts

95

Joined

Mon Mar 02, 2015 9:12 pm

Re: Ublox neo M8N with quanton

by brat002 » Fri Apr 03, 2015 9:45 am

Success! But position hold does not work correctly. Copter want to fly away.
no avatar
User

pug398

Posts

700

Joined

Fri Mar 07, 2014 2:26 am

Re: Ublox neo M8N with quanton

by pug398 » Fri Apr 03, 2015 2:35 pm

Make sure you are using autoconfig as it is still the recommended setting. Make a 6 point calibration and verify heading tracks correctly once enough sats are acquired. I should not have posted that manual settings file in your thread while you were trying to get yours working.
no avatar
User

brat002

Posts

95

Joined

Mon Mar 02, 2015 9:12 pm

Re: Ublox neo M8N with quanton

by brat002 » Sat Apr 04, 2015 5:49 am

I changed compass rotaton to Top0 and problem with fly away was fixed. Here another problem. Does it posible to combine altitude hold with position hold?
no avatar
User

pug398

Posts

700

Joined

Fri Mar 07, 2014 2:26 am

Re: Ublox neo M8N with quanton

by pug398 » Sat Apr 04, 2015 2:33 pm

Under vtolpathfollower settings set "throttle control" to True for it to automatically control altitude. Correct external compass orientation can be tricky at times.
no avatar
User

brat002

Posts

95

Joined

Mon Mar 02, 2015 9:12 pm

Re: Ublox neo M8N with quanton

by brat002 » Sat Apr 04, 2015 3:40 pm

In this case manual throttle control will not available?
Previous

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign
cron