Talk about sensors, OSD systems, radios and anything else related to electronic hardware.
no avatar
User

imperiuscici

Posts

1

Joined

Sun Jun 05, 2016 1:15 am

[noob question] How can i connect Sparky 2 with receiver?

by imperiuscici » Sun Jun 05, 2016 1:50 am

Hi all! I just have a sparky 2 and i have no idea how to connect this FC to my receiver. My first FC was kk2.1.5, this one is easy to connect with receiver. But the new sparky 2, well, i dont know how to do that? My Tx & Rx are FS-T6 and FS-R6B
User avatar
User

odwquad

Posts

14

Joined

Tue Jun 10, 2014 5:46 am

Location

Germany

Re: [noob question] How can i connect Sparky 2 with receiver

by odwquad » Tue Jun 21, 2016 10:24 am

I do not know your receiver but you need a ppm, sbus or a other one wire signal.

Also you have to set the correct jumper for 5v on sparky.

You connect the receiver on port RCvR

Gesendet von meinem Lenovo K50-t5 mit Tapatalk
no avatar
User

williamyjk

Posts

28

Joined

Mon Oct 05, 2015 1:11 am

Re: [noob question] How can i connect Sparky 2 with receiver

by williamyjk » Mon Jul 11, 2016 6:10 pm

There is also a little bit more information here:

https://github.com/TauLabs/TauLabs/wiki ... t-Receiver

You also need to activate the receiver in the ground control software.

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign
cron