Running TauLabs software on hardware that isn't supported? Work with others to get a new platform supported.

Hints on revolution setup

no avatar





Sun Aug 09, 2015 8:08 pm

Hints on revolution setup

by tony123 » Fri Oct 16, 2015 7:33 pm

flight switch not working ? then set position to 3 in software when doing radio wizard
no radio on sat reciver try pluging it into flexi it not main port as I think wizard alters flexi to dsm
flash firmware to revomini if no radio inputs using wizard in software go to green wizard and re install firmware there and follow to the end doing the radio setup.
on opti link flash firmware on groung station to pix ---
then use wizard to bind alter baud rate if connection is slow higher = less range
if gyro looks out of calb IE going wrong way probely setting in output screen recalb even though calabrated in wizard
make sure your esc.s are set to proper hz or quad will be all over the place

module (to get gps working)
pathplanner enable
gps enable
module filter settings
set baud rate to match gps in module misc
set gps port in hardware
set home position on sat lock go on map right click look for home setting
set android to hud to conect via optilink

Hope this helps after half a day of head scratching

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign