I have also a problem with my OPlink Module in use with Taulabs. I get the brushed sparky and try to control the small quad with my taranis over a OPlink Module. But it doesn't work.
The telemetrie works very fine so the connection between sparky and OPlink works. I connected the Taranis on flexiport RX on OPlink Module. In the Taranis I deactivated the internal module and activated the external one. I set it to ppm (22,5ms to 300 u with - direction and 8 channels.
Also I can not cofigurate the OPlink Module in Taulabs GCS. I only see PipXtreme and HWTaulink in the propaty manager is deaktivated. But if i turn on the brushed sparky the GCS get the settings and informations from sparky over OPlink Module.
I want set the bluetooth module tu main port and change the baudrate. But this do not works...
Hope someone can help me.
It will appear grey in the object browser, but you can still put in settings and click 'save'. Everything is grey because GCS thinks it has no connection to a flight board (because the PipX does not do that handshaking).