For discussion on any the supported hardware platforms, such as TauLabs, Quantec, OpenPilot or the STMicro Discovery platforms.
no avatar
User

joergrohde

Posts

51

Joined

Sun Mar 02, 2014 8:56 am

Re: Summary of supported targets

by joergrohde » Mon Mar 23, 2015 6:01 pm

Could you add support for Naze32 Acro/Full rev.5? I found Taulabs fly much better than five pid controllers in Cleanflight firmware.

Yes that´s right you have to use the sixed one - PID controller 5 Harakiri :) I´m flying the Harakiri firmware on Naze since 2013 and for me there is no need to change it there.
To use TL why not take a cheep cc3d. It has the better connection of the MPU, SPI, and on a F1 You don´t get Altitude or GPS to work?
no avatar
User

dflying

Posts

2

Joined

Tue Oct 13, 2015 1:35 am

Re: Summary of supported targets

by dflying » Fri Oct 16, 2015 11:49 pm

So this is a rank newbie question:
After a couple of days of looking I see that CC3D is certainly supported, but what is the specific target (.tlfw) to use to flash cc3d?
I have the 20150922 release...
Thanks!!!
no avatar
User

tracernz

Posts

119

Joined

Mon Apr 06, 2015 7:46 am

Re: Summary of supported targets

by tracernz » Fri Oct 16, 2015 11:57 pm

fw_coptercontrol, CC3D = Copter Control 3D. ;)
no avatar
User

dflying

Posts

2

Joined

Tue Oct 13, 2015 1:35 am

Re: Summary of supported targets

by dflying » Sat Oct 17, 2015 12:19 am

Awesome THX!
I see it now...i'm just not old enough :)
no avatar
User

Noy

Posts

6

Joined

Mon Sep 21, 2015 9:02 pm

Re: Summary of supported targets

by Noy » Sun Jan 03, 2016 1:47 am

Hi Guys,
I'm searching a cheap FC for my FixedWing.
Currently I'm thinking of an cc3d from ebay or eventually better a cc3d atom.
Which one best?
no avatar
User

bektorkhan

Posts

13

Joined

Sat Oct 25, 2014 12:54 am

Re: Summary of supported targets

by bektorkhan » Tue Jan 19, 2016 4:17 pm

Cheap FC @banggood :

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin $47

CK Optimized version Racing F3 Deluxe 10DF Flight Controller For RC Multirotors Supports OneShot ESC $26

The Racing F3 is a Naze32 Dominic F3 version should soon be supported!!
no avatar
User

du1jec

Posts

2

Joined

Mon Mar 07, 2016 7:23 am

Re: Summary of supported targets

by du1jec » Mon Mar 07, 2016 7:41 am

I have a OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin $47
from banggood. Tau Labs GCS connects to the board but it does not show up as supported. How can I flash this board. Rescue does not identify the bootloader.

Thanks.
no avatar
User

icee

Posts

216

Joined

Thu Apr 02, 2015 8:00 pm

Re: Summary of supported targets

by icee » Mon Mar 07, 2016 7:53 am

The target should be 'revomini'.

Are you clicking 'rescue' with the board unpowered before plugging it in?
no avatar
User

du1jec

Posts

2

Joined

Mon Mar 07, 2016 7:23 am

Re: Summary of supported targets

by du1jec » Mon Mar 07, 2016 10:21 am

Senior moment here. I did not remove power before plugging in. Thanks.
no avatar
User

Therflub

Posts

10

Joined

Tue Mar 22, 2016 9:33 pm

Location

Russia

Summary of supported targets

by Therflub » Fri Apr 01, 2016 9:54 pm

Hello:

I wonder if the thumbnail protocol is supported by GrandMA full size console or by the MAonPC software.

I have seen in your web site that Camsys console support it, but also I would like to know if Chamsys for PC software also can do this.

Best regards.

___
SocPlugin: Modern software for advertisement in FB, VK, OK, Mamba
Previous

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign
cron