Development discussion of TauLabs software such as ground control stations, antenna trackers etc.
no avatar
User

pug398

Posts

700

Joined

Fri Mar 07, 2014 2:26 am

Re: PFD (QML) gadget is black..

by pug398 » Thu Jan 15, 2015 11:47 pm

you need to be a little more specific...

You cleared out the previous taulabs config under \roaming and made fresh portable install (on computer) of Taulabs and choose Developer. Open Taulabs to Welcome screen. Bottom right is rx/tx status bar and Connections. You plug in fc and status bars show communication and Connections indicate "USB CopterControl"? They are "talking"?
User avatar
User

pieri70

Posts

116

Joined

Tue Jan 13, 2015 10:08 pm

Location

Trieste, Italy

Re: PFD (QML) gadget is black..

by pieri70 » Fri Jan 16, 2015 7:36 am

Hello Pug
My FC is working, and is talking to the GCS, yesterday I tried to PID it with TxPid and it worked.
The problem was the PFD HUD that I took from Openpilot and that didn't work in Taulabs (my previous experiment)
Now I downloaded last next (20150115) and the problem has gone!
HUD is showing correctly
Thanks
no avatar
User

gdijajmf

Posts

1

Joined

Fri Feb 17, 2017 6:09 am

Re: PFD (QML) gadget is black..

by gdijajmf » Fri Feb 17, 2017 6:19 am

The very effective way to fix this issue is update to the latest release by opening the application and going to Help > Check for Updates. If required the check Dell Precision M6800 Manual- guideusermanual.com/product-name-precision-m6800-manual&po=344515&lang=English for help.
Previous

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign