Just a quick question about setting up a coax x 8 on sparky 2. as there are only 6pwm outputs do i just set the software as a quad and link the esc signal wires or is there some other way. i have seen 7,8,9, 10 pwm on the brushed output but i would need to reverse the pwm signal, i have seen a tab in blheli but i'm unsure about it, any help would be appreciated.
I always use the radio to set it up once i have gone through the wizard. So would like to stay with sparky2. there is a tab in blheli where you can reverse the input polarity, but i think i will take the easy option and set it up as a quad and link the esc signals.