Chat about quadcopters, tricopters, hexacopters or your decacopter.

OneShot 123 Output Values

User avatar
User

jdawson

Posts

4

Joined

Mon Nov 17, 2014 12:26 am

OneShot 123 Output Values

by jdawson » Thu Jun 18, 2015 7:32 pm

I don't understand the significance of output values in TAU Labs. I have a OneShot 123 firmware on my ESC in theTBS Gemini. And I am told now in the nightly build firmware I should set minimum 125 minimum, 133 neutral and 250.

When previously we had numbers like 1500 and 3000 before. Can someone tell me what the numbers mean and why 250 is now the right maximum and not 3000?

All the best,

Joe
no avatar
User

Trex

Posts

83

Joined

Mon Sep 01, 2014 3:35 pm

Re: OneShot 123 Output Values

by Trex » Thu Jun 18, 2015 8:47 pm

Before there was in GCS no correct scaling to the right times, after the Speed of the timer was changed.
Now there are again real physical values you have to put in there in every mode, in normal PPM mode ~1000-2000µs and in OneShot125 mode 125-250µs pulses.

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB ® | phpBB3 Style by KomiDesign
cron